ฝากข้อความ
เราจะโทรกลับหาคุณเร็ว ๆ นี้!
ข้อความของคุณจะต้องอยู่ระหว่าง 20-3,000 ตัวอักษร!
กรุณาตรวจสอบอีเมลของคุณ!
ข้อมูลเพิ่มเติมช่วยให้การสื่อสารดีขึ้น
ส่งเรียบร้อยแล้ว!
เราจะโทรกลับหาคุณเร็ว ๆ นี้!
ฝากข้อความ
เราจะโทรกลับหาคุณเร็ว ๆ นี้!
ข้อความของคุณจะต้องอยู่ระหว่าง 20-3,000 ตัวอักษร!
กรุณาตรวจสอบอีเมลของคุณ!
สถานที่กำเนิด: | จีน |
---|---|
ชื่อแบรนด์: | HUISEN |
หมายเลขรุ่น: | |
จำนวนสั่งซื้อขั้นต่ำ: | 1000pcs |
ราคา: | $2.3-4.88/pc |
รายละเอียดการบรรจุ: | |
เวลาการส่งมอบ: | |
เงื่อนไขการชำระเงิน: | T/T ตะวันตกสหภาพ |
สามารถในการผลิต: |
ชื่อสินค้า: | ไส้หลอด Settler / PVC Lamella สีน้ำเงินสำหรับถังชำระ | รู: | 35/50 / 80mm |
---|---|---|---|
ขนาด: | 1000 * 1000mm | วัสดุ: | พีวีซี |
ความหนา: | 0.4-1mm | สี: | สีฟ้า / สีดำ |
ใบสมัคร: | ถังตกตะกอน | การติดตั้ง: | ติดด้วยกาว PVC |
แสงสูง: | การตั้งถิ่นฐานแผ่น lamella บำบัดน้ำ lamella,lamella water treatment |
ไส้หลอด Settler / PVC Lamella สีน้ำเงินสำหรับถังชำระ
Inclined pipe is mainly used for sedimentation and desanding. ส่วนใหญ่จะใช้ท่อเอียงสำหรับตกตะกอนและ desanding It is the most widely used and mature water treatment device in water supply and drainage engineering in more than ten years. มันเป็นอุปกรณ์บำบัดน้ำที่ใช้กันอย่างแพร่หลายและเป็นผู้ใหญ่ในวิศวกรรมการประปาและการระบายน้ำในกว่าสิบปี It has the advantages of wide application range, high treatment effect and small floor area. มันมีข้อดีของการใช้งานที่หลากหลายผลการรักษาสูงและพื้นที่ชั้นขนาดเล็ก It is suitable for desanding at water inlet, settling, oil separation and tailings concentration treatment of general industrial and domestic water supply. มันเหมาะสำหรับ desanding ที่ทางเข้าของน้ำ, การตกตะกอน, การแยกน้ำมันและแร่ธาตุการรักษาความเข้มข้นของน้ำประปาอุตสาหกรรมทั่วไปและในประเทศ It is suitable for both new construction and reconstruction of existing old pool, and can achieve good economic benefits เหมาะสำหรับการก่อสร้างใหม่และการสร้างสระว่ายน้ำเก่าที่มีอยู่เดิมและสามารถได้รับประโยชน์ทางเศรษฐกิจที่ดี
Our PVC tube settler is fully automated production. ผู้กำหนดหลอดพีวีซีของเราคือการผลิตแบบอัตโนมัติอย่างสมบูรณ์ Compared with manual cutting or machine pressing, Our PVC inclined pipe has uniform thickness,our size is more accurate,shape is more regular and the appearance is more beautiful. เมื่อเทียบกับการตัดด้วยตนเองหรือการกดด้วยเครื่องท่อ PVC ของเรามีความหนาสม่ำเสมอขนาดของเราแม่นยำยิ่งขึ้นรูปร่างมีความสม่ำเสมอมากขึ้นและมีลักษณะที่สวยงามมากขึ้น
We avoid situations where the edges are not straight, have burrs and are irregular in shape, due to manual cutting. เราหลีกเลี่ยงสถานการณ์ที่ขอบไม่ตรงมีเลนซ์และรูปร่างไม่สม่ำเสมอเนื่องจากการตัดด้วยมือ In addition, our tube settler has clear edges and corners.However, when the tube settler needs to reach a certain thickness, the angle of the tube settler produced by the traditional tube settler machine will be arc-shaped. นอกจากนี้ไม้ตายหลอดของเรามีขอบและมุมที่ชัดเจนอย่างไรก็ตามเมื่อผู้ตั้งถิ่นฐานของหลอดต้องมีความหนาบางมุมของไม้ตายหลอดที่ผลิตโดยเครื่องทำหลอดแบบดั้งเดิมจะเป็นรูปโค้ง
นอกจากนี้ยังหลีกเลี่ยงขนาดที่ไม่ได้มาตรฐานที่เกิดจากการกดด้วยเครื่องความยาวและความกว้างของไม้ตายหลอด 1 เมตรทำโดยเครื่องกดความยาวจริงเพียง 96 ซม. ขนาดเบี่ยงเบนขนาดใหญ่ความหนาของไม้ตายหลอดโดย เครื่องกดไม่สม่ำเสมอและแตกง่าย
พารามิเตอร์เทคโนโลยี
วัสดุ | ขนาด (มิลลิเมตร) | สี | ความหนา (mm) | พื้นที่ผิวจำเพาะ (m2 / m3) | พรุน (m2 / m3) |
PP | Dn35 | ขาว | 0.4 | 169.4159 | 0.957 |
DN50 | 0.5 | 119.0055 | 0.9739 | ||
DN80 | 0.8 | 99.3071 | 0.9481 | ||
พีวีซี | Dn35 | ดำหรือน้ำเงิน | 0.4 | 236.0987 | 0.9487 |
DN50 | 0.5 | 119.0055 | 0.9799 | ||
DN80 | 0.8 | 99.3071 | 0.6781 |
ขั้นตอนการติดตั้ง
1. Installation of sludge discharge pipe at the bottom of inclined pipe sedimentation tank the installation sequence of inclined pipe sedimentation tank generally starts from the bottom, and the installation of sludge discharge pipe system at the bottom is completed first to ensure that the opening of sludge discharge pipe meets the design requirements, is fixed firmly, and is not allowed to enter the next installation sequence until it is checked to be correct. 1. การติดตั้งท่อระบายกากตะกอนที่ด้านล่างของถังตกตะกอนแบบเอียงท่อลำดับการติดตั้งของถังตกตะกอนแบบท่อเอียงเริ่มจากด้านล่างและการติดตั้งระบบท่อระบายตะกอนที่ด้านล่างเสร็จสมบูรณ์ก่อนเพื่อให้แน่ใจว่าการเปิดของตะกอน ท่อระบายปล่อยตามข้อกำหนดการออกแบบได้รับการแก้ไขอย่างแน่นหนาและไม่ได้รับอนุญาตให้เข้าสู่ลำดับการติดตั้งถัดไปจนกว่าจะมีการตรวจสอบว่าถูกต้อง A kind of ชนิดของ
2. เสร็จสิ้นการติดตั้งการสนับสนุนการบรรจุของท่อเอียงตามรูปวาดการก่อสร้างการติดตั้งการสนับสนุนการบรรจุของถังตกตะกอนท่อเอียงแรกติดตั้งการสนับสนุนการบรรจุในสถานที่ตรวจสอบว่าข้อต่อเชื่อมทั้งหมดมีความแข็งแรงรองรับแรงพอที่จะรับน้ำหนักบรรจุ และเสร็จสิ้นการรักษาป้องกันการกัดกร่อนบนพื้นผิวการสนับสนุน
3. Complete the hot joining of inclined pipe packing according to the hot joining method of inclined pipe packing, each packing of inclined pipe packing shall be treated as a separate hot joining unit, which is 1m2 after the hot joining of one unit. 3. การบรรจุท่อเอียงแบบร้อนให้เสร็จสมบูรณ์ตามวิธีการรวมแบบร้อนของการบรรจุท่อแบบเอียงการบรรจุท่อแบบเอียงแต่ละครั้งจะถือว่าเป็นหน่วยการเชื่อมร้อนแบบแยกต่างหากซึ่งมีขนาด 1m2 หลังจากการรวมร้อนของหนึ่งหน่วย After the hot joining, it shall be stacked orderly on the site (a small amount of loose pieces shall be reserved for standby). หลังจากการเข้าร่วมที่ร้อนแรงนั้นจะถูกจัดเรียงอย่างเป็นระเบียบบนไซต์ (สงวนชิ้นส่วนขนาดเล็กจำนวนเล็กน้อยไว้สำรองไว้เพื่อสแตนด์บาย) A kind of ชนิดของ
4. Assembly in inclined tube packing tank assemble the pressed packing unit on the upper part of the packing support from left to right. 4. ประกอบในถังบรรจุหลอดแบบเอียงประกอบหน่วยบรรจุที่กดบนส่วนบนของการสนับสนุนการบรรจุจากซ้ายไปขวา Keep the angle of 60 ° unchanged all the time. รักษามุม 60 °ไม่เปลี่ยนแปลงตลอดเวลา Each unit shall be properly pressed during assembly in sequence. แต่ละหน่วยจะต้องกดอย่างถูกต้องระหว่างการประกอบตามลำดับ If the size is not right when assembling to the right side, it is necessary to use a piece of oblique tube packing according to the size to iron and connect until all are in place. หากขนาดไม่ถูกต้องเมื่อประกอบไปทางด้านขวาจำเป็นต้องใช้ชิ้นส่วนของหลอดแบบเฉียงตามขนาดของเหล็กและเชื่อมต่อจนกว่าจะเข้าที่
5. The upper part of the inclined pipe packing is fixed because the proportion of the inclined pipe packing is 0.92, which is slightly less than water, the inclined pipe packing needs to be pulled from left to right above the packing after it is assembled in the tank The round steel of 10 mm shall be reinforced (two round steels are required to pass the upper part of each unit filler). 5. ส่วนบนของการบรรจุท่อแบบเอียงได้รับการแก้ไขเนื่องจากสัดส่วนของการบรรจุท่อแบบเอียงคือ 0.92 ซึ่งน้อยกว่าน้ำเล็กน้อยการบรรจุท่อแบบเอียงจะต้องดึงจากซ้ายไปขวาด้านบนบรรจุหลังจากประกอบเข้าด้วยกัน ถังเหล็กกลมขนาด 10 มม. ต้องเสริม (ต้องใช้เหล็กกลมสองอันเพื่อผ่านส่วนบนของแต่ละหน่วยบรรจุ) Both ends of the round steel shall be reliably fixed on the wall of the sedimentation tank. ปลายทั้งสองของเหล็กกลมจะต้องได้รับการแก้ไขอย่างน่าเชื่อถือบนผนังของถังตกตะกอน After the installation of the round steel, it can well prevent the possible loosening and floating of the inclined pipe filler in the initial use. หลังจากการติดตั้งเหล็กกลมมันสามารถป้องกันการคลายและการลอยตัวของฟิลเลอร์ท่อแบบเอียงในการใช้ครั้งแรก The round steel shall be corrosion-resistant with coal tar epoxy asphalt. เหล็กกลมจะต้องทนต่อการกัดกร่อนด้วยน้ำมันดินอีพ็อกซี่ยางมะตอย